Click image to view full size image
1. Technical parameter
a. Material of processible coiled plate: apply for carbon steel plate δ b≤450Mpa
b. Thickness of coiled plate: δ=1-10mm
c. Width of coiled plate: 1550mm
d. Slitting width tolerance: ±0.1mm
e. Line speed: 0-30m/min
f. Loading capacity: 25T
g. Coil I.D: φ500-φ760mm
h. Coil O.D: ≤φ2000mm
i. Diameter of knife pivot: φ280mm
j. Slitting blade: φ280×φ480×25
k. Material of slitting blade: 9SiCr
l. Hardness of blade: HRC58°-60°
m. Recoiler I.D: φ760mm
n. Power: 380V three-phase electricity 50Hz
o. The main components & damageable component in electronic equipments is accordance with GB stipulation
2. Composed devices
a. Hydraulic entry car, capacity: max. 25T
b. Hydraulic decoiler
c. Hydraulic pressing, shovel-head, pinch and preliminary flattening device
d. Rolling-orbit table: 4m
e. Guide device
f. Slitting machine
g. Scrap winder orbit table
h. Straightener
i. PLC fixed length control device
j. Hydraulic shearing machine
k. Unload working table
l. Hydraulic system
m. Electrical system
| Used in customer's factory |
Cold rolling mills slitting and cut to length to line for stainless steel / steel plate
